Table of Contents
Advertisement
®
Anybus
Tunnel Gateway
4.5. DIN Rail Demount
Before You Begin
Have a flat-blade screwdriver, size 5.5 mm, available.
Procedure
Figure 5. Release and unhook the Tunnel Gateway
To remove the Tunnel Gateway from the DIN rail
1.
Insert the screwdriver into the DIN rail clip tab A.
2.
To release the DIN rail clip, pull and hold tab A downwards.
3.
Unhook the Tunnel Gateway from the DIN rail.
Page 10 of 45
DIN Rail Demount
SCM-1202-233 Version 1.0
Advertisement
Table of Contents
Need help?
Do you have a question about the Anybus AWB5300 and is the answer not in the manual?
Questions and answers