Parameter Group - Danfoss VLT FC 100 Manual

8 Parameters
8.3 Par am et er Gr oup 11
11- 00 Neur on I D
Range:
0 N/A* [0 - 0]
11-10 Dr ive Pr of ile
Opt ion:
[0] * VSD profile
11-15 LON War ning Wor d
Range:
0 N/A* [0 - FFFF ]
Bit
0
1
2
3
8
4
5
6
7
8
9
10
11
12
13
14
15
11- 17 XI F Revision
Range:
0 N/A* [0 - 0]
11- 18 LonWor k s Revision
Range:
0 N/A* [0 - 0]
11- 21 St or e Dat a Values
Opt ion:
[0] * Off
[2] Store all setups
54
Funct ion:
View the Neuron chip's unique Neuron ID number.
View the Neuron chip's unique Neuron ID number.
Funct ion:
This parameter allows selecting between LONMARK Functional Profiles.
The Danfoss Profile and the Node Object are common for all profiles.
Funct ion:
This parameter contains the LON specific warnings.
Status
Internal fault
Internal fault
Internal fault
Internal fault
Internal fault
Reserved
Reserved
Reserved
Reserved
Invalid type change for changeable types
Initialization error
Internal communication error
Software revision mismatch
Bus not active
Option not present
LON input (nvi/nci) exceeds limits
Funct ion:
This parameter contains the version of the external interface file on the Neuron C chip on the LON
option.
Funct ion:
This parameter contains the software version of the application program on the Neuron C chip on
the LON option.
Funct ion:
This parameter is used to activate storing of data in non-volatile memory.
Store function is inactive.
Stores all parameter values in the E
been stored.
MG.11.E2.02 - VLT
2
PROM. The value returns to
®
is a registered Danfoss trademark
VLT® FC 100 LonWorks
Off
when all parameter values have