Danfoss VLT FC 100 Manual page 53

VLT® FC 100 LonWorks
NB!
This parameter is active only when par.8-01
8-55 Set -up Select
Opt ion:
[0] Digital input
[1] Bus
[2] Logic AND
[3] * Logic OR
NB!
This parameter is active only when par.8-01
8-56 Pr eset Ref er ence Select
Opt ion:
[0] Digital input
[1] Bus
[2] Logic AND
[3] * Logic OR
NB!
This parameter is active only when par.8-01
Control Site is set to [0] Digital and control word
Funct ion:
Select control of the frequency converter set-up selection via the terminals (digital input) and/or via
the fieldbus.
Activates the set-up selection via a digital input.
Activates the set-up selection via the serial communication port or fieldbus option.
Activates the set-up selection via the fieldbus/serial communication port, AND additionally via one
of the digital inputs.
Activate the set-up selection via the fieldbus/serial communication port OR via one of the digital
inputs.
Control Site is set to [0] Digital and control word
Funct ion:
Select control of the frequency converter Preset Reference selection via the terminals (digital input)
and/or via the fieldbus.
Activates Preset Reference selection via a digital input.
Activates Preset Reference selection via the serial communication port or fieldbus option.
Activates Preset Reference selection via the fieldbus/serial communication port, AND additionally
via one of the digital inputs.
Activates the Preset Reference selection via the fieldbus/serial communication port OR via one of
the digital inputs.
Control Site Digital and control word
is set to [0]
®
MG.11.E2.02 - VLT is a registered Danfoss trademark
8 Parameters
.
.
.
8
53