Inactivity Manager - Motorola MK2200-0N0SCKBWT0R - Micro Kiosk MK2200 Product Reference Manual

To select a date, tap the date in the calendar.
3.
To set the current time, highlight the hours, minutes, seconds or AM/PM field in the
4.
up/down scroll arrows to change the highlighted selection.
To change the time zone, select it from the list labeled
5.
Tap on the check box for the system to automatically adjust the clock for daylight saving.
6.
Tap Apply to apply the new date/time settings.
7.
NOTE The date resets to June 1, 1999, 12:00 PM upon a cold boot. Use the Control Panel or the SNTP Client to
update this (see
To permanently set the time zone and daylight saving settings, use the RDM or System Menu on the
MK22X0.

Inactivity Manager

To set up the inactivity manager:
Tap
1. Start > Settings > Control Panel
Double-tap the
2.

Inactivity Manager

Inactivity Manager Screen
Figure 3-7
Select the application to run during inactivity by tapping the
3.
SimpleSaver.exe.)
Enter the timeout (in seconds). The default is 0, which allows the system to run continuously without going into
4.
inactivity mode.
Tap OK.
5.
Tap
6. Start > Programs > Save Configuration
file.
Network Time Update: SNTP Client on page
.
icon.
to save the new settings in the MK22X0 configuration (mkconfig.reg)
.
Time Zone
8-10).
button. (The default application is
Configuration 3 - 25
field. Tap the
Current Time