Chapter 6 RS-232 Interface
Introduction
This chapter provides RS-232 host information for setting up a scanner. The RS-232 interface connects the
scanner to point-of-sale devices, host computers, or other devices with an available RS-232 port (e.g., com port).
NOTE This scanner uses TTL RS-232 signal levels, which interfaces with most system architectures. For system
architectures requiring RS-232C signal levels, Motorola offers different cables providing the TTL to
RS-232C conversion. Contact Motorola Enterprise Mobility Support for more information.
If your host does not appear in
documentation for the host.
Throughout the programming bar code menus, asterisks (
Table
6-2, set the communication parameters to match the host. Refer to the
*
Baud Rate 9600
*
Indicates Default
*
) indicate default values.
Feature/Option