Omron CJ - PROGRAMMING MANUAL 12-2009 Programming Manual page 195

Block Programming Instructions
Instruction Symbol/Operand
Mnemonic
Code
COUNTER WAIT CNTW(814)
CNTW
814
(BCD)
CNTWX N: Counter
817 number
(Binary)
SV: Set value
(CS1-H, CJ1-H,
I: Count input
CJ1M, or CS1D
only)
CNTWX(817)
N: Counter
number
SV: Set value
I: Count input
HIGH-SPEED TMHW(815)
TIMER WAIT
TMHW
815
(BCD)
N: Timer number
SV: Set value
TMHWX
TMHW(818)
818
(Binary)
(CS1-H, CJ1-H,
CJ1M, or CS1D
only)
N: Timer number
SV: Set value
Delays execution of the rest of the block program until the specified count
N
has been achieved. Execution will be continued from the next instruction
SV
after CNTW(814)/CNTWX(817) when the counter counts out.
N
SV
C
Delays execution of the rest of the block program until the specified
N
time has elapsed. Execution will be continued from the next
SV
instruction after TMHW(815) when the timer times out.
N
SV
BEND
C
FunctionS
SV: 0 to 9,999 times for BCD and
0 to 65,535 times for binary
"A"
executed.
SV
preset.
Time elapsed.
"B" executed.
"C" executed.
"C" "C"
executed. executed.
SV: 0 to 99.99 s for BCD and
0 to 655.35 s for binary
"A"
executed.
SV
Time elapsed.
preset.
"B" executed.
"C" executed.
Section 3-30
Location
Execution condition
Block program
Required
Block program
Required
155