2.2 Mechanical Installation
When drives with IP20/NEMA Type 1 enclosures are mounted side by side, the top protective covers of all drives must
be removed as shown in
cover.
Figure 2.4
◆ Digital Operator Remote Usage
Remote Operation
■
The digital operator mounted on the drive can be removed and connected to the drive using an extension cable up to 3 m
long. This makes it easier to operate the drive when it is installed in a location where it can not be accessed easily.
The digital operator can also be permanently mounted in a remote location like a panel door. An extension cable and an
installation support set (depending on the installation type) will be required.
Note:
Refer to Drive Options and Peripheral Devices on page 375
Figure 2.5
42
Figure
2.4.
Refer to Top Protective Cover on page 64
Figure 2.4 IP20/NEMA Type 1 Side-by-Side Mounting in Enclosure
Drive
Figure 2.5 Communication Cable Connection
for information on extension cables and installation support sets.
Operator
Comm Port
S / N : J007XE273710001
Communication Cable Connector
YASKAWA ELECTRIC SIEP C710616 27C YASKAWA AC Drive A1000 Technical Manual
to remove and reattach the top protective
common_
TMonly