YASKAWA A1000 Series Technical Manual page 44

2.2 Mechanical Installation
External/Face-Mount
1.
Cut an opening in the enclosure panel for the digital operator as shown in
2.
Position the digital operator so the display faces outwards, and mount it to the enclosure panel as shown in
Figure 2.7.
Figure 2.6
Figure 2.7
Internal/Flush-Mount
An internal flush-mount requires an installation support set that must be purchased separately. Contact your Yaskawa
representative to order an installation support set and mounting hardware.
Installation Support Set A.
1.
Cut an opening in the enclosure panel for the digital operator as shown in
2.
Mount the digital operator to the installation support.
3.
Mount the installation support set and digital operator to the enclosure panel.
Figure 2.8
M4 × 10
Phillips truss head screw × 4
(for panel widths between 1 and 1.6)
common_TMonly
Note: For environments with a significant amount of dust or other airborne debris, use a gasket between the enclosure panel and the
digital operator.
44
Digital Operator
Figure 2.7 External/Face-Mount Installation
Figure 2.8 Panel Cut-Out Dimensions (External/Face-Mount Installation)
Figure 2.9 Internal/Flush Mount Installation
M3 × 6
Phillips recessed
pan head machine screw × 2
Enclosure panel
22
22
14
Unit: mm
Figure 2.9
Enclosure panel
Digital Operator
YASKAWA ELECTRIC SIEP C710616 27C YASKAWA AC Drive A1000 Technical Manual
Figure 2.8.
common_TMonly
Unit: mm
common_TMonly
illustrates how to attach the
Figure 2.10.
Installation Support Set A
M3 × 6
Phillips recessed
pan head machine screw × 2
Unit: mm