Settings; Detection Range - Optex REDSCAN Pro RLS-50100V Settings Manual

4. Settings

RLS-50100V 3.x.x (xxxx/xx/xx)
Apply settings

Detection range

Detection profile 1 Detection range
Detection profile 2
Event code
Detection mode
View
Tilt direction
Date and Time
Network
Maintenance
Information
RLS-50100V 3.x.x (xxxx/xx/xx)
Start area scanning?
Apply settings
Detection range
Detection range
Detection profile 1
OK
Detection profile 2
Event code
View
Date and Time
Network
Maintenance
Information
Outdoor
Auto
Detection range expansion
Area set
Confirm
Cancel
Detection mode Outdoor
Tilt direction Auto
Detection range expansion
Area set
4-1. Detection range
?
These items are already set in "Initial settings", in
normal process, so there is no need to set these
items again. Modify the parameters only when you
need to change them.
Save
Detection
Tilt direction [ Vertical, Horizontal, Auto ]
"Auto"
"Area setting" and set the method automatically.
Use in default
Detection range expansion
RLS-50100V
[ 50 m x 100 m rectangle, 80 m x 190° fanshape]
RLS-3060V
[ 30 m x 60 m rectangle, 50 m x 190° fanshape]
Area set
?
Confirmation 1
Click "OK" to start the area setting, or "cancel" it.
Save
16
mode [ Outdoor, Indoor ]
setting allows to detect the direction in the
"Auto" setting normally.