Ip Camera Settings; Enable; Ip Address Settings; Registration Insight To Chekt Portal Site - Optex INS-HX-80N Installation Instructions Manual

Step
2

IP address settings

The default network type of InSight is dynamic. If you do not have a DHCP server,
access the following IP address. Change the InSight network type to Static and set
the IP address;
Initial address: Refer to the label on the InSight
User name: root
Default password: OPTEX
Refer to the "IP Camera Setting Manual" in more detail.
Step
3

Registration InSight to CHeKT portal site

The default network type of InSight is dynamic. If you have a DHCP server, it will automatically set the IP address.
1. Setup your CHeKT Dealer Portal:
2. Before getting started with CHeKT, you will need access to a CHeKT dealer web portal.
Access to this portal allows you to install and manage the InSIght series.
If you do not have an account, please request a dealer account by visiting:
www.chekt.com/registration
Refer to the "https://support.chekt.com" for more detail.
- 5 -

IP camera settings

CHeKT settings