Settings (App) - Optex Virtual Loop Installation Instructions Manual

4

Settings (App)

The OVS-02 series can be programed using a smartphone. (It can only be programed by a smartphone.)
* The dedicated App is free of charge, but data fees may be incurred during use.
Before using the App
Before using the App, the following contents should be fully understood.
Be sure to read the terms and conditions and the privacy policy regarding the use of the App,
which are indicated in the App.
The App will use the location information, Bluetooth, and camera functions of the smartphone.
Please allow use of these features.
Donwload the smartphone App from the 2D code
or search it with words "OPTEX Virtual Loop"
at AppStore or GooglePlay.
OPTEX VirtualLoop
Log in to the App
1
After starting the App for the first time and consenting to the terms and conditions, the screen to set an
App user will appear.
Entry is optional. After you input a user, the "Sensor list" screen will be shown.
You can edit the entered information at any time.
After updating the sensor settings, the user will be displayed as an administrator within that App.
Log in to the sensor
2
When logging into a sensor for the first time, set a login password on the sensor while referring to the
cautions below. Manage passwords carefully to avoid breaches and loss.
Passwords can be changed.
If a password is lost, press and hold the reset switch for more than 5 seconds to reset the sensor to its
factory settings.
Share the Favorite
3
● When not connected to the sensor
From the ☆ icon on the "Sensor list" screen, saved Favorites can be shared.
● When sharing the settings of the sensor being set
Settings can be shared from the 2D code icon on the "Parameter list" screen.
Register shared Favorite
4
You can read the 2D code from the 2D code icon on the "Application and Favorite setting" screen.
To read a 2D code image that has been saved onto a smartphone, select the Folder icon.
Caution
* When setting a password, refer to the following points, and determine a password that will not be
easily guessed by others.
• A string from the sensor ID (as is, reversed, repeated, etc.)
• Passwords that can be guessed from the installation site or the company name (e.g. post code,
address, telephone number, company name, etc.)
• Consisting entirely of the same number or letter.
• Simple numerical or alphabetical sequences (e.g. 123456)
• A word from a dictionary
GooglePlay
-6-
AppStore