Table of Contents
Advertisement
Settings
1
Disassemble
1
Jumper pin settings
2
JP1
Alarm output mode
N.C. (default)
JP3
Battery saving timer
120 s (default)
Assemble
3
Open the base cover, and to set the detector.
JP2
PIR sensitivity
Turn the jumper PIN
by 90 degrees to prevent
interference with the casing.
N.O.
5 s
Close the base cover, and fasten the screw to fix the cover.
H
(recommended)
Mounting height: > 3.5 m
4
M
L
(default)
3.0 to 3.5 m
< 3.0 m
(11'6")
(9'10" to 11'6")
(9'10")
Advertisement
Table of Contents
