Input; Input Terminal; Onvif Relay Output - Optex REDSCAN Pro RLS-50100V Settings Manual

RLS-50100V 3.x.x (xxxx/xx/xx)
Apply settings
Detection range

Input terminal

Detection profile 1
Detection profile 2

Input

Action
Input terminal
Response output

ONVIF relay output

*
Judgement time (sec.)
Event code
Laser settings
Mode
Camera settings
ONVIF media profile
View
Event log
Date and Time
Network
Security
(Bold letters = advanced settings)
* = Ver.3.0 or later
RLS-50100V 3.x.x (xxxx/xx/xx)
Apply settings
Detection range
ONVIF relay output
Detection profile 1
Detection profile 2
RO#1
Input
Input terminal
ONVIF relay output *
Action
Event code
Response output
Laser settings
Camera settings
ONVIF media profile
View
Event log
Date and Time
Network
Security
(Bold letters = advanced settings)
* = Ver.3.0 or later
?
Save
None
No response
1
N.O.
?
Save
RO#2
None
No response
5-2. Input
5-2-1. Input terminal
Action
[ None, Detection profile switching, Area set,
LED turns ON*, Sensor check
* = Ver.3.0 or later
# = No response is returned during trouble output (AM/AR/SO/TR) or
Disqualified environment output (DQ).
Response output
[ No response, Output 1, 2, 3, 4, 5, 6 ]
Judgement time
[ 0 to 10 ]
Mode
[ N.O., N.C. ]
5-2-2. ONVIF relay output
Select the relay output for settings.
[ RO#1, 2 ]
Action
[ None, Detection profile switching, Area set,
LED turns ON, Detector check ]
(1) Duplicate settings cannot be made for input of the input terminal
and RO#1/2 of the ONVIF relay output.
(2) No response is returned during trouble output (AM/AR/SO/TR) or
Disqualified environment output (DQ) with "Detector check" setting.
Response output
[ No response, ONVIF digital input 1, 2, 3, 4, 5, 6 ]
40
5. Advanced Settings
# ]
*
(Ver.3.0 or later)