Optex REDSCAN Pro RLS-50100V Settings Manual
Laser scan detector
Hide thumbs
Also See for REDSCAN Pro RLS-50100V:
- Important product information (3 pages) ,
- Installation instructions (2 pages)
Table of Contents
Advertisement
Quick Links
REDSCAN Pro
1-1. Configure root password .......................................................................
1-2. Sign in ...................................................................................................
1-3. Select Language ...................................................................................
1-4. Configure IP address ...........................................................................
1-5. Select power line frequency ..................................................................
1-6. Adjust the mounting position .................................................................
1-7. Detection ..............................................................................................
2-1. Home view ...........................................................................................
2-2. Status display .......................................................................................
2-3. Setting display ......................................................................................
3-1. To use ONVIF ......................................................................................
3-2. ONVIF menu on Profile 1 and 2 ...........................................................
3-3. ONVIF menu on Advanced settings .....................................................
4-1. Detection range.....................................................................................
4-2-1. Detection area ................................................................................
4-2-2. Masking/ Allocating.........................................................................
4-2-3. Detection.........................................................................................
4-2-4. Detection advanced........................................................................
4-2-5. Dynamic event filtering ..................................................................
4-2-6. Output terminals.............................................................................
4-2-7. ONVIF digital inputs.......................................................................
4-2-8. ONVIF motion alarm .....................................................................
4-2-9. HTTP notice ..................................................................................
4-2-10. Detection profile copy ..................................................................
4-3. Detection profile 2.................................................................................
4-4. Event code............................................................................................
4-5-1. Laser...............................................................................................
4-5-2. Video ..............................................................................................
*
...............................................................................................
4-5-4. Menu ..............................................................................................
Laser Scan Detector
RLS-50100V
Setting guide
(running on Windows 10 or later, Mac, Android)
Table of contents
4-6. Date and times .........................................................................................
2
2
4-7-1. TCP/IP Basic .....................................................................................
3
4-7-2. TCP/IP Advanced ..............................................................................
3
4-7-3. SNMP ................................................................................................
4
4-8-1. System ...............................................................................................
5
4-8-2. Logs ..................................................................................................
7
4-8-3. Import/ Export ....................................................................................
10
11
4-9-1. Product information ...........................................................................
4-9-2. Installation information ......................................................................
12
13
5-1. Menu view ................................................................................................
14
15
5-2-1. Input terminal .....................................................................................
16
5-3. Laser settings ..........................................................................................
5-4-1. Image adjustment ..............................................................................
18
5-4-2. Privacy mask ......................................................................................
20
5-4-3. Miscellaneous ....................................................................................
22
23
5-5-1. H.264 Encoding ................................................................................
25
5-5-2. JPEG Encoding ................................................................................
26
26
5-6-1. Record ...............................................................................................
27
5-6-2. Play ...................................................................................................
27
28
5-7-1. User Management .............................................................................
28
5-7-2. ONVIF User Management .................................................................
29
5-7-3. Certificates .........................................................................................
5-7-4. HTTPS ...............................................................................................
30
5-7-5. IEEE 802.1X .......................,,,,,,,........................................................
31
* Ver.3.0 or later
32
33
RLS-3060V
Support browser: Chrome
*
........................................................................
No. 59-2973-5
EN
(Ver. 3.x.x)
34
34
35
35
36
37
37
38
38
39
40
40
41
42
43
44
45
45
46
47
48
49
50
51
51
Advertisement
Table of Contents
Related Manuals for Optex REDSCAN Pro RLS-50100V
Summary of Contents for Optex REDSCAN Pro RLS-50100V
-
Page 1: Table Of Contents
No. 59-2973-5 REDSCAN Pro Laser Scan Detector RLS-50100V RLS-3060V Setting guide (Ver. 3.x.x) Support browser: Chrome (running on Windows 10 or later, Mac, Android) Table of contents 1. Initial configuration 4-6. Date and times ..................1-1. Configure root password ............... 4-7. -
Page 2: Initial Configuration
1. Initial configuration 1-1. Configure root password Configure root password “root” The password for the administrator must be changed before the product can be used. Available: Alphabets [ A to Z. ] Password: Numbers [ 0 to 9 ] Symbols Confirm password: [ ! "... -
Page 3: Select Language
1. Initial configuration RLS-50100V 3.x.x (xxxx/xx/xx) 1-3. Select Language Please select a language. Select language to be used in this software. English Default: English Next RLS-50100V 3.x.x (xxxx/xx/xx) 1-4. Configure IP address Please configure IP address. Configure the IP address of the gear running this software. -
Page 4: Select Power Line Frequency
1. Initial configuration RLS-50100V 3.x.x (xxxx/xx/xx) Please configure IP address. Configuration Static Running Wait for the reading the settings ..IP address 192.168. 0. 126 Detector restarting... Subnet mask 255.255.255.0 Default gateway 192.168.0.1 Save & Reboot Next 1-5. Select power line frequency RLS-50100V 3.x.x (xxxx/xx/xx) Please select power line frequency. -
Page 5: Adjust The Mounting Position
1. Initial configuration 1-6. Adjust the mounting position. RLS-50100V 3.x.x (xxxx/xx/xx) Adjust the mounting position while checking the camera image. Refer to the following pages for the procedure. Please adjust the mounting position. Next Adjusting with image checking 【Horizontal detection area】 【Vertical detection area】... - Page 6 1. Initial configuration Angle Adjustment A fine angle adjustment with LAC-1 Adjust the position of laser path with LAC-1 which provides LED and sound when it receive infrared beams to secure < HINTS > required detection area. 3 LED’ s indicate detection area sensitivity independently to locate high sensitive area precisely.
-
Page 7: Detection
1. Initial configuration 1-7. Detection Detection mode: [ Outdoor, Indoor ] RLS-50100V 3.x.x (xxxx/xx/xx) Detection range expansion: -> See the column below for details Area set Go back Finish Detection mode Outdoor Detection range expansion Detection mode Outdoor Mode: Area set This option can be selected for general outdoor applications. - Page 8 1. Initial configuration RLS-50100V 3.x.x (xxxx/xx/xx) Detection range expansion Detection range expansion RLS-50100V 3.x.x (xxxx/xx/xx) Area set Detection mode Outdoor Start the area scanning and then setting. Detection range expansion Click to pop-up open the confirmation window, and start the area scanning after OK is clicked. Area set Go back Go back...
- Page 9 1. Initial configuration RLS-50100V 3.x.x (xxxx/xx/xx) The last screen of the “1. Initial configuration” Detection mode Outdoor Push the button to finish this procedure. Detection range expansion Area set Go back Finish RLS-50100V 3.x.x (xxxx/xx/xx) The “Home view” screen appears after the “1.
-
Page 10: Display
2. Display 2-1. Home view RLS-50100V 3.x.x (xxxx/xx/xx) RLS-50100V 3.x.x (xxxx/xx/xx) Indication of the software version and the update date. Detection range Limit the detection area. Sensing area The location displayed in gray is the area actually detected by the laser sensor. Num X (mm) Y(mm) Size (mm) -01203 02704... -
Page 11: Status Display
2. Display RLS-50100V 3.x.x (xxxx/xx/xx) Personal figure; who is log in. Guide; Click to open the separate window. Status display Click to display the status. Recording Start/Stop Switch the profile displayed Full screen Snap shot Num X (mm) Y(mm) Size (mm) -01203 02704 00284... -
Page 12: Setting Display
2. Display 2-3. Setting display Apply settings Click to apply changings, to close the settings RLS-50100V 3.x.x (xxxx/xx/xx) window and to restart the process. Save the settings Click to save the set parameters. Apply settings Save Menu window Detection range List the setting menu Detection range Detection profile 1... -
Page 13: Onvif Settings
3. ONVIF settings REDSCAN Pro series supports ONVIF and RTSP. Client application can get video stream of embedded camera in REDSCAN Pro series. RLS-50100V 3.x.x (xxxx/xx/xx) Username and password are common to ONVIF and RTSP. Apply settings Save Even if ONVIF is not used, create ONVIF account by the sequence below to use Detection range RTSP authentication. -
Page 14: Onvif Menu On Profile 1 And 2
3. ONVIF Settings 3-2. ONVIF menu on Profile 1 and 2 When set the "Always show advanced settings" to enable, 2 ONVIF menu items appear on each Profile 1 and 2. 4-2-6. ONVIF digital inputs RLS-50100V 3.x.x (xxxx/xx/xx) Can set the each terminal individually according Apply settings Save to the ONVIF format. -
Page 15: Onvif Menu On Advanced Settings
3. ONVIF Settings 3-3. ONVIF menu on Advanced settings When set the "Always show advanced settings" to enable, 2 ONVIF menu items also appear on ONVIF media profile. RLS-50100V 3.x.x (xxxx/xx/xx) 5-5. ONVIF media profile Apply settings Save 5-5-1. H.264 Encoding Detection range H.264 Encoding Detection profile 1... -
Page 16: Settings
4. Settings 4-1. Detection range RLS-50100V 3.x.x (xxxx/xx/xx) These items are already set in "Initial settings", in normal process, so there is no need to set these items again. Modify the parameters only when you need to change them. Apply settings Save Detection mode [ Outdoor, Indoor ]... - Page 17 4. Settings RLS-50100V 3.x.x (xxxx/xx/xx) Save the settings Click to save the detection range settings. Apply settings Save Detection range Detection range Detection profile 1 Detection profile 2 Event code Detection mode Outdoor View Tilt direction Auto Date and Time Network Detection range expansion Maintenance...
-
Page 18: Detection Area
4. Settings RLS-50100V 3.x.x (xxxx/xx/xx) Confirm Saved. Apply settings Save Use the ‘Apply settings’ button after all settings are finished. Detection range This will restart or reboot the detector. Detection range Detection profile 1 Confirmation 3 Detection profile 2 Final confirmation of the detection range settings, Event code Detection mode Outdoor... - Page 19 4. Settings RLS-50100V 3.x.x (xxxx/xx/xx) * View window can be moved by dragging, when any “tool” is not selected. save the edited results. Cancel: undo the edited results. Tool Crop: cutting the detection area partially. Tool Edit: adjust the shape of the cutting area. Delete: cancel the cutting of the detection area.
-
Page 20: Masking/ Allocating
4. Settings 4-2-2. Masking/ Allocating RLS-50100V 3.x.x (xxxx/xx/xx) Mode [ None, Mask, Allocating ] Mask: masking area is available to ignore some Apply settings Save area and reduce false alarm. Detection range Allocating: allocated areas are available to Detection profile 1 Area masking/Allocating distinguish where objects are detected. - Page 21 4. Settings RLS-50100V 3.x.x (xxxx/xx/xx) 4-2-2-2. Allocating Allocating selection Allocation selection Cancel Select one to allocate. Eraser Tool Select Pen or Rectangle. Tool --> See the explain below for details. Rectangle Edit Edit Undo: return to the previous settings. Undo Redo Redo: cancel “undo”...
-
Page 22: Detection
4. Settings 4-2-3. Detection Multi settings If “Use multi detection sesitivity” is selected, it can make each area be set differently by the area. Detection RLS-50100V 3.x.x (xxxx/xx/xx) Use multi detection sensitivity Detection target Mobile object Apply settings Save Moving distance (mm) 1000 Detection range Detection profile 1... -
Page 23: Detection Advanced
4. Settings 4-2-4. Detection advanced RLS-50100V 3.x.x (xxxx/xx/xx) 1. Common items for Horizontal/Vertical mode Environmental resistance Outdoor mode only [ Disable, Enable, Enhanced ] Disable: Response time of alarm is minimum but false alarm can increase in harsh environment such as a fog or snow. Enable: False alarm can be reduced by balanced detection ability. - Page 24 4. Settings RLS-50100V 3.x.x (xxxx/xx/xx) Apply settings Save Detection range 2. Horizontal mode Detection profile 1 Detection advanced Detection area Excluded distance from the detector (m) Area Masking/Allocating Environmental resistance Enable [ 0 to 50 rectangle, 0 to 80 fanshape] RLS-50100V Detection Auto area adjustment...
-
Page 25: Dynamic Event Filtering
4. Settings Additional menu on Profile 1 and 2 When set the "Always show advanced settings" to enable, following 4 menu items appear on each Profile 1 and 2. --> Refer to Section "4-5-3. Menu" "5-1. Menu view". [1] 4-2-5. Dynamic event filtering [2] 4-2-7. -
Page 26: Output Terminals
4. Settings 4-2-6. Output terminals Can set the each terminal individually. RLS-50100V 3.x.x (xxxx/xx/xx) Select the terminal for settings Apply settings Save [ Output 1, 2, 3, 4, 5, 6 ] Detection range Select events Detection profile 1 Output terminals [ A1, A11, A12, A21, A22, B1, B11, B12, B21, B22, Detection area AM, AR, SO, DQ, TR, TA, DM ]... -
Page 27: Onvif Motion Alarm
4. Settings RLS-50100V 3.x.x (xxxx/xx/xx) 4-2-8. ONVIF motion alarm Can set the ONVIF motion alarm responding Apply settings Save to the select events. Detection range Detection profile 1 ONVIF motion alarm Select events Detection area Area Masking/Allocating [ A1, A11, A12, A21, A22, B1, B11, B12, B21, B22, Detection AM, AR, SO, DQ, TR, TA, DM ] Detection advanced... -
Page 28: Detection Profile Copy
4. Settings 4-2-10. Detection profile copy RLS-50100V 3.x.x (xxxx/xx/xx) Apply settings Apply settings Copy the settings to the profile 2. Detection range Detection profile copy It can be adjusted individually after copying. Detection profile 1 Detection area Detection area Select items Area Masking/Allocating Area masking/Allocating The selected items will be copied to the profile 2. -
Page 29: Event Code
4. Settings 4-4. Event code RLS-50100V 3.x.x (xxxx/xx/xx) Use event code If unchecked, the event code will not be sent. Apply settings Save Detection range Event code Select the type of the communication protocol Detection profile 1 [ UDP, Primary TCP, UDP + Primary TCP, Use event code Detection profile 2 Primary/Secondary TCP,... -
Page 30: View
4. Settings RLS-50100V 3.x.x (xxxx/xx/xx) 4-5. View 4-5-1. Laser Apply settings Save Detection range Laser Detection profile 1 Detection/sensing area Detection profile 2 Show detection range Event code Area Show sensing area View Show detection range Laser Show detection area Show sensing area Video Show detection area... -
Page 31: Video
4. Settings RLS-50100V 3.x.x (xxxx/xx/xx) 4-5-2. Video Overlay text They do not appear in the images on the browser. Only for RTSP streaming. Show text Apply settings Save Text [A to Z, a to z] [0 to 9] [ ! " # $ % & ' ( ) * Detection range Video + , - . -
Page 32: Map
4. Settings 4-5-3. Map (Ver.3.0 or later) RLS-50100V 3.x.x (xxxx/xx/xx) Map image Image display settings for the ONVIF distribution video. JPEG files of prepared background images or bird's-eye Revert Apply settings view images are displayed instead of the real time Detection range camera images, enabling both detection area/intruding Detection profile 1... -
Page 33: Menu
4. Settings 4-5-4. Menu RLS-50100V 3.x.x (xxxx/xx/xx) Apply settings Save Detection range Menu Detection profile 1 Detection profile 2 Event code Unit [ Metric, Feet ] Always show advanced settings. View Unit Metric Theme Laser [ Use system settings, Light, Dark ] Theme Use system settings Video... -
Page 34: Date And Times
4. Settings 4-6. Date and time RLS-50100V 3.x.x (xxxx/xx/xx) Apply settings Save Current time Detection range Date and Time Date Detection profile 1 Detection profile 2 Current time Time Event code Date 2021/01/26 View Time settings Time 13: 31: 43 Date and Time Time zone [ GMT-12 to +14 ]... -
Page 35: Tcp/Ip Advanced
4. Settings 4-7-2. TCP/IP Advanced RLS-50100V 3.x.x (xxxx/xx/xx) DNS settings Apply settings Save Configuration [ Static, DHCP ] Detection range TCP/IP Advanced Domain name Detection profile 1 Primary DNS Detection profile 2 Configuration Static Secondary DNS Event code Domain name View HTTP setting Date and Time... -
Page 36: Maintenance
4. Settings 4-8. Maintenance RLS-50100V 3.x.x (xxxx/xx/xx) 4-8-1. System Apply settings Detection range Reboot System Detection profile 1 Perform a reboot Detection profile 2 Reboot Event code Factory reset Reboot View Keep network settings: Factory reset Date and Time restore to the default settings except network settings Network Keep network settings Clear network settings:... -
Page 37: Logs
4. Settings 4-8-2. Logs RLS-50100V 3.x.x (xxxx/xx/xx) Apply settings Show system log Detection range Logs Show access log Detection profile 1 Detection profile 2 Show system log Event code Show access log View Date and Time Network Maintenance System Logs Import/Export Information 4-8-3. -
Page 38: Information
4. Settings 4-9. Information RLS-50100V 3.x.x (xxxx/xx/xx) 4-9-1. Product information Apply settings Detection range Product information Detection profile 1 Model name Detection profile 2 Model Event code Serial number RLS-50100V View Serial number Date and Time Network Firmware version xxxxxxxxxxxxx Maintenance Firmware version Information... -
Page 39: Advanced Settings
5. Advanced Settings 5. Advanced settings RLS-50100V 3.x.x (xxxx/xx/xx) 5-1. Menu view Apply settings Save Detection range Menu Detection profile 1 If “Always show advanced settings” is checked, Detection profile 2 Event code several additional items will be displayed as shown. Always show advanced settings. -
Page 40: Input
5. Advanced Settings 5-2. Input 5-2-1. Input terminal RLS-50100V 3.x.x (xxxx/xx/xx) Apply settings Save Action Detection range [ None, Detection profile switching, Area set, Input terminal Detection profile 1 LED turns ON*, Sensor check Detection profile 2 * = Ver.3.0 or later Input Action None... -
Page 41: Laser Settings
5. Advanced Settings RLS-50100V 3.x.x (xxxx/xx/xx) 5-3. Laser settings Angle correction [ -5° to +5° ] The inclination of the detection area is corrected by software Apply settings ° Save within ±5 Detection range Laser settings Detection profile 1 Window heater Detection profile 2 The RLS-LWVH has a transparent conductive film heater inside Input... -
Page 42: Camera Settings
5. Advanced Settings 5-4. Camera settings RLS-50100V 3.x.x (xxxx/xx/xx) 5-4-1.Image adjustment Image [ 0 to 100 ] Brightness [ 0 to 255 ] Contrast [ 0 to 255 ] Sharpness Apply settings Revert [ 0 to 255 ] Saturation Detection range Image adjustment [ Auto, Vertical, Horizontal ] Distortion correction... -
Page 43: Privacy Mask
5. Advanced Settings 5-4-2. Privacy mask RLS-50100V 3.x.x (xxxx/xx/xx) If you need to maintain privacy such as nearby facilities or people, you can use the privacy mask function to mask the specified area of the image. Masking configuration Add: to add a masking area for the camera images Delete: to delete a masking area of the camera images Apply settings... -
Page 44: Miscellaneous
5. Advanced Settings RLS-50100V 3.x.x (xxxx/xx/xx) 5-4-3. Miscellaneous Video output [ Camera, All black, Mosaic ] Camera: Camera images without any processing All black: Black images. Settings on “Camera - Apply settings Save Privacy mask” and “View - Video” are ignored. Detection range Miscellaneous Mosaic: Images with mosaic. -
Page 45: Onvif Media Profile
5. Advanced Settings ONVIF menu on Advanced settings When add a user in "ONVIF User Management", 2 ONVIF menu can be used. --> Refer to Section “3. ONVIF settings” RLS-50100V 3.x.x (xxxx/xx/xx) Apply settings Save 5-5. ONVIF media profile Detection range 5-5-1. -
Page 46: Record
5. Advanced Settings 5-6. Event log 5-6-1. Record You can save the camera image by using the set R.E.C. RLS-50100V 3.x.x (xxxx/xx/xx) (REDSCAN Event Code. See list below) as a trigger. You can set the Pre/Post recording time and the trigger Apply settings Save to start recording. -
Page 47: Play
5. Advanced Settings 5-6-2. Play RLS-50100V 3.x.x (xxxx/xx/xx) Play the recorded images. Play search Date Date from [ YYYY/MM/DD ] [ YYYY/MM/DD ] Time Time from [ HH:MM:SS ] [ HH:MM:SS ] Apply settings Trigger Detection range Play Detection profile 1 [ Area set, Manual, Detection profile 2 Date... -
Page 48: Security
5. Advanced Settings 5-7. Security RLS-50100V 3.x.x (xxxx/xx/xx) 5-7-1. User Management Apply settings You can edit the user information to log in the system. Detection range User management Detection profile 1 Detection profile 2 User list User Input Add a new user User name User group Event code... -
Page 49: Onvif User Management
5. Advanced Settings RLS-50100V 3.x.x (xxxx/xx/xx) Apply settings 5-7-2. ONVIF User Management Detection range ONVIF User Management User list Detection profile 1 Add a new user Detection profile 2 ONVIF User Input Modify the selected user User name User group Event code Delete the selected user root... -
Page 50: Certificates
5. Advanced Settings 5-7-3. Certificates RLS-50100V 3.x.x (xxxx/xx/xx) Create/install a certificate required for server Apply settings communication in HTTPS and IEEE 802.1X. Detection range Certificates Detection profile 1 Detection profile 2 Certificate ID Issued on Expires on Input Certificate ID list default-self-signed 2021/03/11 2037/12/31 Event code Install a certificate ID... -
Page 51: Https
5. Advanced Settings 5-7-4. HTTPS RLS-50100V 3.x.x (xxxx/xx/xx) Apply settings Save Detection range HTTPS Connection method [ HTTP, HTTPS, HTTP & HTTPS ] Detection profile 1 Detection profile 2 Server certificate [ None, default-self-signed ( - 20xx/xx/xx) ] Connection method HTTP&HTTPS Input Choices are added when the certificate is created. - Page 52 OPTEX CO., LTD. (JAPAN) www.optex.net OPTEX INC./AMERICAS HQ (U.S.) OPTEX SECURITY SAS (France) OPTEX KOREA CO.,LTD. (Korea) www.optexamerica.com www.optex-europe.com/fr www.optexkorea.com OPTEX (EUROPE) LTD./EMEA HQ (U.K.) OPTEX SECURITY Sp.z o.o. (Poland) OPTEX (DONGGUAN) CO.,LTD. www.optex-europe.com www.optex-europe.com/pl SHANGHAI OFFICE (China) www.optexchina.com OPTEX SECURITY B.V.
Need help?
Do you have a question about the REDSCAN Pro RLS-50100V and is the answer not in the manual?
Questions and answers