Installation; Overview; Safety Precautions - Ametek BrightTEK ST9 Series Operator's Manual

41-622 BrightTEK ST9x Operator Manual
™
2.0

Installation

2.1

Overview

The BrightTEK ST95 Cellular Uplink Host is available
alongside LMS level sensors or can be purchases
separate and integrating with existing LMS sensors al-
ready in use. The uplink interfaces to industry standard
4–20mA devices and may be used with Programmable
Controllers or other such devices. The uplink ships
pre-wired with 50 feet of cable to allow installation of
the ST95 Uplink Client in a convenient location. This is
desirable especially for battery changes where tanks are
high and difficult to get to without a ladder or lift.
Carefully follow and adhere to the instructions below.
The ST95 Uplink Client must be mounted in a location
where it will be protected from activities which may
subject it to damage. A mounting kit has been selected
to firmly secure it to your chosen location.
The ST95 Cellular Uplink Host or the ST95 Uplink Client
may be used in this product. Determine which type you
to avoid communications issues. A host uses cellular
signals like a Cellphone and needs to have cellular cov-
erage wherever it is located. Likewise, the client needs
to talk to the host that it is assigned to. It has a limited
range that it can communicate over. If you are not famil-
iar with wireless devices, contact AMETEK LMS Cus-
tomer Support at fieldservice.magnetrol@ametek.com.
If you have a client, do not install the battery until
you have contacted the Customer Support Center.
They will guide you to the next step.
2.2

Safety Precautions

• This product must be installed and maintained in strict
accordance with the National Electrical Code and any
other applicable local electrical code. Refer to the Sys-
tem Control Drawing (906-00017) in the appendix of this
manual for specific installation information. Failure to
observe this warning could result in serious injuries or
damages.
• If you are not familiar with Industrial Hazardous Loca-
tion Standards, consult with a safety expert before you
attempt to install this device.
5