Choosing Device Alarm Triggers - Ametek BrightTEK ST9 Series Operator's Manual

41-622 BrightTEK ST9x Operator Manual
™
1. Click the Alarms tab to display the Tank Alarms screen.
2. In the Alarm Setup pane, enter your desired Low Alarm
Level and High Alarm Level for the selected tank. En-
ter the number as a percentage of volume.
NOTE: The default low alarm level is 32%.
3. Enter the Critical Low Alarm Level and Critical High
Alarm Level for the selected tank. Enter the number as
a percentage of volume.
4. Enter the Fill/Drain Detect Volume and Short Fill/Drain
Detect Volume for the selected tank.
5. Click the Save All button.

10.0.2 Choosing Device Alarm Triggers

In the Device Alarm Setup pane of the Tank Alarms
screen, you can select when you want the monitor to
send out an additional inventory beyond the call sched-
ule, such as on low product levels, high product levels,
or other conditions.
Selecting any of the check boxes in the Device Alarm
Setup pane tells the monitor, if applicable, to detect
when the product volume has exceeded thresholds set
in the Alarm Setup Pane and send a transmission to the
application indicating the specific alarm.
Tank Alarms – Device Alarm Setup
To specify which alarms will be used with this tank, per-
form the following steps:
1. Select one or more of the following check boxes:
• Call on Low Alarm
• Call on High Alarm
• Call on Critical Alarm
• Call on Critical Low
• Call on Critical High
75