Selecting Tank Alarm Email Recipients - Ametek BrightTEK ST9 Series Operator's Manual

58

9.3.13 Selecting Tank Alarm Email Recipients

Scroll down to the Edit / Create Email Alert Definitions
pane of the Tank Alarms screen to define who will re-
ceive email alerts. Depending on the type of alarm, you
may want to notify different departments. For instance,
if the battery is low, the main office departments. For
instance, if the battery is low, the main office may need
to be notified to order new batteries. If the tank level is
low, the distribution company may need to be notified.
Tank Alarms – Device Alarm Setup
1. Either choose a user from the Add New User / Group
User drop-down list or Enter an Email Address of the
person to receive the alarm notification.
NOTE: By entering an email address, a user will be
created as a part of this organization and can be select-
ed from the drop-down list for any subsequent alarm
setups. The user details can be edited later to include
website-viewing permissions.
2. Click the Add Alarm button.
The email recipient will appear in the Email Alert Defini-
tions pane above.
3. Repeat steps 1 – 2 to add as many email recipients as
needed.
4. In the Email Alert Definitions pane, enter an Alarm
Description for reference, such as "Low Level Alarm."
5. Select the check boxes corresponding to each type of
alarm that you want this user to receive.
6. Select the email size, either Normal or Short. Short
messages contain only a subject line and are recom-
mended for mobile phone email.
NOTE: An Alarm entity cannot be deleted. If you no longer need to
send an alarm to a user, inactivate the email notification by
clearing the Active check box.
41-622 BrightTEK ST9x Operator Manual
™