CHAPTER
3
Disassemble the Mechanical Drive Spline
Assembly
Spline Assembly Disassembled
FIGURE 1.
Female Spline
Adapter
Locate the 7/8" 36 tooth spline adapter assembly (P/N 063-4001-024).
1.
Disassemble the spine adapter assembly as shown in Figure 1 above.
2.
Remove the Steering Wheel
Note:
The steps in this section require use of a steering wheel puller (not supplied). For questions on the
proper procedure for removing the steering wheel, contact your local equipment dealer.
P/N 016-5030-051 Rev. B
M echanical Drive
C h a p t e r 3
Installation
Nut
Bolts
Washer
Male Spline
Adapter
9