Wheel Base
The Wheel Base screen displays the distance from the center of the front
axle to the center of the rear axle. You must set this measurement during
the initial set up of the system in order for the system to steer properly.
Note:
The Wheel Base and Minimum Turning Radius
screens will only display the pre-programmed settings if a a
specific vehicle tune set has been selected as the Machine
Type.
Measuring the Wheel Base
1. Measure the wheel base of the vehicle. This is the distance from the
center of the front axle to the center of the rear axle.
2. Press the Left or Right arrow button until the correct wheel base value
appears.
Manual #016-0159-956
3 3