Table of Contents
Advertisement
Adjustments by qualified personnel
29
7.7.3 Adjusting the lower leg length
The required leg support height depends on the lower leg length of the user and the thickness of the seat cushion.
1) Loosen the thumb screw on the leg support holder (see fig. 30, item 1).
2) Adjust the lower leg length as needed (see fig. 30, item 2). Ensure that the foot plate bar is inserted at least
40 mm into the leg support holder.
3) Tighten the thumb screw.
30
7.7.4 Adjusting the support angle
The leg support angle setting should be chosen so that the ankle is in a relaxed, comfortable position.
1) Loosen the hexagon socket screw on the foot plate suspension (see fig. 31, item 1).
2) Turn the foot plate to the desired angle.
3) Tighten the hexagon socket screw to 6 Nm.
31
7.7.5 Adjusting the posterior lower leg pad
The calf pads are adjustable in height and depth.
24
Start Multi
Advertisement
Table of Contents
