Table of Contents
Advertisement
58
9.6 Seat
WARNING
Seat cushions and back support pads may ignite
Burns due to user error
► The seat and back support upholstery as well as seat cushions, padding and covers fulfil the normative
requirements for flame resistance. However, they may still ignite if fire is handled improperly or negligently.
► Keep away from all ignition sources, especially lit cigarettes.
9.6.1 Adjusting the seat angle
CAUTION
Incorrect handling of the seat tilt (seat inclination)
Tipping over, falling out of the seating shell/seat due to errors in handling the product
► First practise operating the seat tilt without the user sitting in the seat.
► Only operate the seat tilt on a level, firm surface.
► Always activate the anti-tipper before operating the seat tilt.
► Before negotiating slopes or crossing obstacles, the seat tilt must be lowered (horizontal neutral position of
the seat). It is advisable to incline the seat tilt slightly to the rear when driving downhill.
► Never use the release lever to operate the seat tilt in an uncontrolled manner.
► When activating the release lever, always secure the user against falling out to the front or rear. To do so,
hold on tight to the push handle.
The seat is continuously adjustable from -5° to 30°.
1) Hold the push handles firmly.
2) Activate and hold the release lever on the left push handle (see fig. 59, item 1).
→ The locking mechanism is released.
3) CAUTION! Do not reach into the adjustment mechanism when using the seat tilt. Avoid getting caught
in the Bowden cable. Bring the seat to the desired angle by moving the push handles (see fig. 60).
4) Let go of the release lever.
→ The seat is fixed in the desired position.
Start Multi
Use
35
Advertisement
Table of Contents
