Delivery
Label
1)
YYYY = year of manufacture; WW = week of manufacture; PP = production site; XXXX = sequential production
number
2)
YYYY = year of manufacture; MM = month of manufacture; DD = day of manufacture
3)
UDI-PI to GS1 standard; UDI = Unique Device Identifier, PI = Production Identifier
4)
UDI-DI to GS1 standard; UDI = Unique Device Identifier, DI = Device Identifier
4.5.2 Warning labels
Label
5 Delivery
5.1 Scope of delivery
The product is generally delivered fully assembled and with the drive wheels removed (variant with 24" drive
wheels). The wheels are already preassembled on the variant with 12" drive wheels.
The scope of delivery includes:
•
Preassembled wheelchair
•
2 drive wheels
•
Instructions for use
5.2 Standard equipment
Standard equipment includes:
•
Seat frame: seat tilt from -5° to 30°
•
Back support: back support inclination from 0° to 50°, with specified back support angle from 90° to 140°
•
Telescoping push handles
•
Drive wheels: 12" or 24" PU with drum brakes
•
Caster wheels: 8" PU in caster forks with threaded axle
•
Seat cushion
•
Back support pad
•
Elevating leg supports
•
Pommel
•
Head support
•
Lap belt
•
Anti-tipper 2 x
5.3 Storage
5.3.1 Storage during daily use
The product should always be stored so it is protected against external influences.
5.3.2 Storage during extended disuse
The product must be stored in a dry place. Specific information for extended storage: see page 51.
It is not necessary to disassemble the product.
12
I
Manufacturer's reference number for the product variant
J
Serial number (PI)
3),1)
K Global Trade Item Number (DI)
Fixation point to attach the product in vehicles for transporting
persons with reduced mobility.
The product is approved as a seat in a vehicle for transporting
persons with reduced mobility only if this symbol is stuck onto
the fixation points of the product.
Meaning
4)
Meaning
Start Multi