Adjusting The Side Panels; Adjusting The Depth Of The Forearm Supports; Adjusting The Clothing Guard - Otto Bock Start Multi Instructions For Use Manual

1) Height adjustment: Loosen the hexagon socket screws on the tube clamp (see fig. 32, item 1). Slide the calf
pad to the desired height (see fig. 32, item 2). Tighten the hexagon socket screws.
2) Depth adjustment: Loosen and remove the hexagon socket screw on the calf pad (see fig. 33, item 1). Move
the calf pad to the desired position (see fig. 33, item 2). Tighten the hexagon socket screw.
32

7.8 Adjusting the side panels

7.8.1 Adjusting the depth of the forearm supports

The depth of the forearm support can be adjusted to 2 positions.
1) Remove the hexagon socket screws underneath the forearm support (see fig. 34, item 1).
2) Adjust the depth of the forearm support (see fig. 34, item 2).
3) Tighten the hexagon socket screws.
34

7.8.2 Adjusting the clothing guard

1) Loosen the hexagon socket screws on the clothing guard (see fig. 35, item 1).
2) Adjust the depth of the clothing guard (see fig. 35, item 2).
3) Tighten the hexagon socket screws.
Start Multi
Adjustments by qualified personnel
33
25