DeWalt DWE4206 Original Instructions Manual page 45

Max.
[mm]
D b
115 –
D
125 –
d
75 30
b
D
115 12
D
125 12
additional Information for Guards and accessories for DWE4206 , DWE4207, DWE4217, DWE4227, DWE4235,
When using segmented diamond wheels, use only
diamond wheels with a peripheral gap not greater than
10 mm and negative rake angle.
DO NOT USE
segmented diamond wheels with a peripheral gap greater
than 10 mm and/or a positive rake angle.
For all grinding, sanding, and wheel type wire brushing
accessories, the lowest portion of the accessory must
be contained within the guard enclosure with 2 mm or
greater clearance to the bottom lip of guard.
Min. Peripheral
[mm]
Rotation speed hole length
–1
[min. ] [m/s]
d
– 11500 80
– 11500 80
M14 11500 45
M14 11500 80
M14 11500 80
DWE4237, DWE4238, DWE4257
Protecting the Environment
Threaded
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
[mm]
household waste.
Products and batteries contain materials that can
–
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
–
www.2helpU.com.
20.0
20.0
20.0
≤10 mm
EnGLIsh
≥2 mm
45