DeWalt DWE4206 Original Instructions Manual page 35

Voltage
Type
Power input
No-load/rated speed
Grinding wheel diameter
Grinding wheel thickness (max)
Cutting off wheel diameter
Cutting off wheel thickness (max)
Wire wheel diameter
Wire wheel thickness (max)
Spindle diameter
Spindle length
Weight
* weight includes side handle and guard
Noise and vibration total values (triax vector sum) according to
EN62841-2-3:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Surface grinding
Vibration emission value a =
h,AG
Uncertainty K =
Disc sanding
Vibration emission value a =
h,DS
Uncertainty K =
Cutting off
Vibration emission value a
h,CO
Uncertainty K =

CAUTION: Working with the wire brush or the abrasive cutting can lead to different vibration levels!
The declared vibration and noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and noise emission level
represents the main applications of the tool. However if the
tool is used for different applications, with different accessories
or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.

WARNING : Grinding thin sheets of metal or other easily
vibrating structures with a large surface can result in a total noise
V
AC
W
-1
min
mm
mm
mm
mm
mm
mm
mm
kg
dB(A)
dB(A)
dB(A)
m/s²
m/s²
m/s²
m/s²
= m/s 2
m/s 2
DWE4235 DWE4237
230 230
5 5
1400 1400
11500 11500
125 125
6.4 6.4
125 125
3 3
125 125
13 13
M14 M14
18.5 18.5
1.85* 1.85*
93 93
101 101
3 3
7.7 7.7
1.5 1.5
2.9 2.9
1.5 1.5
7.0 7.0
1.5 1.5
emission much higher (up to 15 dB) than the declared noise
emission values. Such workpieces should as far as possible be
prevented from emitting sound by suitable measures such as the
application of heavy flexible damping mats. The increased noise
emission is also to be considered for both the risk assessment of
noise exposure and selecting adequate hearing protection.
EC-Declaration of Conformity
Machinery Directive
Small Angle Grinders
DWE4206, DWE4207, DWE4217, DWE4227, DWE4235,
DWE4237, DWE4238, DWE4257
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015 +A11:2022 EN IEC 62841-2-3:2021
+A11:2021.
EnGLIsh
DWE4238 DWE4257
230 230
5 5
1400 1500
9300 2800-10000
150 125
6.4 6.4
150 125
1.6 3
150 125
13 13
M14 M14
18.5 20.1
2.5* 2.5*
94 92
102 100
3 3
5.1 5.9
1.5 1.5
3.5 3.0
1.5 1.5
5.0 5.4
1.5 1.5
35