Table of Contents
Advertisement
CUTMASTER 50+, CUTMASTER 70+
3.03
Gas Connections
Connecting Gas Supply to Unit
The connection is the same for compressed air or high pressure cylinders.
1.
Connect the air line to the quick connect inlet port. The following illustration shows typical
gas line with quick connect fittings as an example.
NOTE!
For a secure seal, apply thread sealant to the fitting threads, according to manufacturer's instructions. Do not use Teflon
tape as a thread sealer, as small particles of the tape may break off and block the small air passages in the torch.
30
Applying Thread Sealant
Air Connection to Inlet Port
INSTALLATION
0700 402 229
Advertisement
Table of Contents
