ESAB CUTMASTER 50+ Operating Manual page 3

WARNING
! !
Read and understand this entire Manual and your employer's safety practices before installing, operating, or
servicing the equipment.
While the information contained in this Manual represents the Manufacturer's best judgment, the Manufacturer
assumes no liability for its use.
Plasma Cutting Power Supply
CutMaster® 50+, CutMaster® 70+
SL60™ 1Torch™
Operating Manual Number 0700 402 229
Published by:
ESAB Group Incorporated
2800 Airport Rd.
Denton, Texas 76207
www.esab.com
© Copyright 2023 by
ESAB
All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the
publisher is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for
any loss or damage caused by any error or omission in this Manual, whether such
error results from negligence, accident, or any other cause.
Original Publication Date: 8 June, 2023
Revision Date: 8 June, 2023
See website for Warranty Information.
Record the following information for Warranty purposes:
Where Purchased:_______________________________ _____________________
Purchase Date:__________________________ ____________________________
Power Supply Serial #:_______________________________ _________________
Torch Serial #:______________________________ _________________________
i i