Table of Contents
Advertisement
This unit can be remote-controlied using the optional RM-LP80
Local Remote Control Unit. The controls on the RM-LP80
correspond to the numbered controls of the GY-X1TC
as
shown below.
Connect to the
camera's RM
connector using the
cable provided with
the RM-LP80.
@
ON for remote
operation."
No corresponding
control on the:
@
camera.
®
White balance
contro! knobs,
effective when switch
@® is set to MANU.
Iris control knob,
effective when switch
@is set to MANU.
Black level control
knob.
* In the "ON" position, switches on the camera corresponding to those
on the remote control except
© are not operable. Also, viewfinder
indications for settings of these switches are not available.
Corresponding switch positions
RM-LP80 =| GY-X1TC
; "onnection diagram
0 dB, 9 dB, and 18 dB,
regardless of the setting by the
memory function.
Auto setup operation"
Auto black operation
* Auto setup operation:
Automatic
adjustment
of
black
balance, white balance and black
balance in that sequence.
9dB
eo
AUTO SET
SETUP/BLK
AUTO SHIFT
None
AUTO WHITE
| WHT
AUTO BLACK
| SETUP/BLK
AUTO
AUTO!
MANU
PRESET
The cable is provided with
the RM-LP80.
Notes
® Quick-recording start/stop cannot be remote-controlled.
e Refer to the instruction manual of the RM-LP80 for other
information.
—50—
Advertisement
Table of Contents
