Ee Escesesessescneensecsssneseseseseeenserssneatees - JVC GY-X1TC Instructions Manual

@ The camera settings currently set by the memory function
punehon Pan can be stored on the memory card.
A C) +O) ® Unless a memory card is installed, the following operations
MENU CURSOR DATA are not possible. ;
() = C7 a) e For the memory card, see page 45.
SET 1. Open the function box cover by pushing the unlock lever to
Buttons to be used the rear.
2. Press the MENU button.
pion woreneed The MENU is displayed on the viewfinder screen, with the
ae ey g ae oper- cursor (white square) blinking to the left of a number.
ation, the previous 3. Press the CURSOR " A" or "W" button so that the cursor
screen is recalled. blinks against No.2.
4. Press the SET button.
The sub-menu (CARD WRITE) will be displayed, with the
names of custom scene files stored in the memory card and
related comments.
When the MENU
@ 4.10 +C
MENU CURSOR DATA
o/s
SET
venenegne . Move the cursor (white triangle) to the desired file with either
CURSOR button.
. Press the SET button.
The comment of the file to which the camera is currently set
will appear and blink below the comment.
© If a comment is not preset, a white line corresponding to
the size of one character appears as a cursor.
@ When the data write command is executed, this blinking
comment will replace the one selected in step 5.
e You can rewrite the comment which is blinking.
CHAR MIX: OFF
To rewrite the comment
aan ay oy UU UE
SELECT WRITE _FILE
>CUSTOM! STUDIO! Max. 8 characters
@ eis the a character with the DATA buttons.
D ABCDEFGHI JKLMNOPGRS——\
TUVWXY201 23456789. >: +4
24> 1 t—K/L& (LC) shows a space.)
@ Move the blinking position with the CURSOR buttons.
" A": to move to the left (<---).
" ¥": to move to the right (--->).
=CARD WRITE-
SELECT WRITE_FILE
CUSTOM! STUDIO!
Repeat steps @ and ©.
After completion, proceed to step 7
. Press the SET button.
"OK?" will appear.
—CARD WRITE-
SELECT WRITE_FILE
+CUSTOM! STUDIO!
8. If you do not want to execute the command, press the
MENU button. The sceen will change to the sub-menu
(CARD WRITE).
To execute the command, press the SET button.
The data will be stored together with the comment and, after
showing the message "COMPLETE", the screen will change
to the sub-menu (CARD WRITE).
CO 42 +2
MENU CURSOR DATA
@vO -O
SET
7. 8.
COMMENT: INITIAL
OK ?f
9. To return to the original screen (camera signal), press the
MENU button twice.
— 34—