Special Functions; Auto Equalizer (Aeq) Reference Signal (Gy-X1Tc Only); Video Level Indication - JVC GY-X1TC Instructions Manual

SPECIAL FUNCTIONS
Aud2/A
Pes fe)
NOMAL 120 250 500 10004
. QUICK
POWER = REC
Auto equalizer: (AEQ) reference signal...
(provided only on:the:GY-X14FC) 22: ee
If you are going to edit footage recorded with this unit using
the JVC BR-S811 and BR-S611 S-VHS recorders, use the
AEQ function to obtain better dubs.
An AEQ on/off switch is provided inside the unit. Prior to
shipment, this switch is preset to ON.
When the AEQ switch is set to ON, a reference signal is
recorded during the blanking period of the video signal
being recorded. When a tape recorded in this way is played
back on the BR-S811 and BR-S611, the AEQ circuit in these
machines will perform frequency compensation according to
the recorded reference signal, thereby improving the
dubbing quality.
@ The reference signal is recorded on line 17 during the
vertical blanking period. If this is not appropriate for
some reason, the reference signal recording position
can be changed or the AEQ switch can be set to OFF.
For more information, consult the dealer from whom
you purchased this unit or a JVC dealer.
—30—
Electronic shutter Pinip ay mentite Sickest
The electronic shutter mode which offers higher shutter speeds
is effective when shooting fast-moving objects that may be
analyzed later in playback. While the standard shutter speed is
1/50 second, the electronic shutter mode offers five speeds:
1/120, 1/250, 1/500 and 1/1000 second.
To engage the electronic shutter mode:
1. Press the 120 250 500 1000 button. The LED will light.
Each time the button is pressed, the speed
changes in the following sequence:
- — 1/250 —— 1/500 —— _.
The selected shutter speed will be displayed for
a few seconds on the viewfinder screen.
2. To return to the normal shutter speed, press the NORMAL
button. (The LED will go off.)
@ The higher the shutter speed, the lower the sensitivity.
Brighter lighting is necessary when using high shutter
speeds. Do not use high shutter speeds in dimly lit places.
@ In the auto iris mode, the iris is wider in the high speed
mode than in the normal shutter mode. This also changes
the depth of focus.
@ When the high speed mode is used under fluorescent
lighting, the picture may flicker.
Video level indication
A zebra pattern shows the portion the video level of which is
about 80% to 90%. Refer to this indication when adjusting the
iris manually.
ZEBRA switch ON : Indication on.
ZEBRA switch OFF _ : Indication off.
Title display es Lae
The title preset using the memory function can be recorded
superimposed on the scene being shot. The title is displayed
on the viewfinder screen.
To call up the title display:
1. Press the TITLE button. The title will be displayed. (If
pressed during recording, it will be recorded.)
2. Releasing the button cancels the title display.
~ 2
@ As long as a title is on the screen, warning messages and
the status display are not available. Call up the title
display only when it is necessary.
© For composing titles, see page 35.
® Nothing will be displayed if a title has not been preset.