Table of Contents
Advertisement
_Self-diagnostic functions.»
@.0+O
MENU
CURSOR
DATA
CVG)
+E)
SET
HOUR
METER
MEMORY
B1.CARD
MEMORY
2.VOICE
ALARM: ENG
3.AUTO
CIRCUIT
4.LED:
menus
-SELF
DIAG-
Various diagnostic
Function box
NU
CURSOR
DATA
4C¥) +0
ME
OOvQ
-CO
SET
Buttons to be used
When
the
MENU
button is pressed
during menu oper-
ation, the previous
screen is recalled.
OOH
OK
—42—
@ The self-diagnostic functions let you check whether the
camera's circuits are operating properly.
Selection of the menu and sub-menu
1. Open the function box cover by pushing the unlock lever to
the rear.
iw
. Press the MENU button.
The MENU is displayed on the viewfinder screen, with the
cursor (white square) blinking to the left of a number.
Nad
'Press the CURSOR " A" or " ¥" button so that the cursor
blinks against No. 5.
4. Press the SET button.
The sub-menu SELF DIAG will be displayed.
5. Move the cursor to the desired item with the CURSOR
buttons.
6. Press the SET button.
The selected mode will be engaged. (See the next page.)
7. Repeat steps 5 and 6 as required.
8. To return to the original screen (camera signal), press the
MENU button twice.
Checking the hour meter and the memory
These two items can be checked on the SELF DIAG screen.
The sub-menu need not be called up.
@ HOUR METER
Indicates the total running hours of the VTR in steps of 10
hours.
Use
this as
a reference
for scheduling
maintenance.
e MEMORY
Indicates the condition of the built-in EPROM
(program
memory): "OK" when it is normal, and "NG" if there is a
failure. If "NG" appears, consult an authorized JVC
Service agent.
Advertisement
Table of Contents
