Table of Contents
Advertisement
Initializing data
4 SET UP
e Sub-menu
-SYSTEM
RESET-—
OK ?
When this menu is selected, the message shown above
appears.
@ If you do not want to initialize data, press the MENU button.
The screen will return to the sub-menu (SET UP MENU).
@ |f you want to initialize data, press the SET button.
After
completion of initialization,
a message "COMPLETE?" will
appear.
Date and time setting
e Master menu (MENU)
~~ e Parameter screen
4 SET UP
2s.
8
'S!
10:16
@ Indications setting
Parameter name
Data
1. DISPLAY STYLE
MDY - YMD - DMY
The method of displaying the date in titles or on the Mode-2
Status display screen can be selected.
MDY:
Inthe order month, day and year. e.g. 8.29 '91
YMD:
Inthe order year, month and day. e.g. '91 8.29
DMY: _ Inthe order day, month and year. e.g. 29.8 '91
—41—
e@ Master menu (MENU)
e Parameter screen
@ For the procedure of selecting menus,
see page 36.
@ After performing initialization, all the parameters set using
the memory function will be reset to the data preset prior
to shipment. Be very careful when using this function.
e The following data is protected and will not be reset by
initialization:
Display style of date and time and correction (See
below).
Language of audible warning messages
(English/
Japanese) (See page 43)
e After initialization has been executed, the scene file name
on the Mode-2 status display will change to "PRESET
INITIAL".
Currently set
date and time
e For the procedure of selecting menus,
see page 36.
e Correction
Parameter name
Data
When this parameter is selected, the cursor (white square)
appears at the parameter number and blinks.
Correction procedure
1.
Press the SET button.
2. Correct the blinking digits with the DATA buttons.
The sequence
of the date and time indication differs
depending on the selected display style.
MDY: Month, day, year, hour, minute
YMD: Year, month, day, hour, minute
DMY: Day, month, year, hour, minute
3. Move the blinking position with the CURSOR buttons.
" A" button: to move in the direction of right.
" ¥" button: to move in the direction of left.
4. Repeat steps 2 and 3 as required.
5. After setting all the items (year, month, day, hour, minute),
press the SET button.
Advertisement
Table of Contents
