. Align the guides of the battery holder with the rails of the
2. Push down the battery holder.
camera head.
Positioning marks (¥) facilitate connection.
—_
When removing the battery holder, push it up while pressing
this button.
1. Attach the tripod base to the tripod.
@ Use either the 1/4" or 3/8" threaded hole depending on
the tripod used.
© Select one of the three threaded holes (front, middle, rear)
considering the center of gravity of the camera.
2. Turn the lever clockwise while pressing the unlock button of
the tripod base.
3. Insert the tab on the rear of the camera into the hook on the
rear of the tripod base and place the camera on the tripod
base.
4. Turn the lever of the tripod base counterclockwise to secure
the camera.
Note
When removing the camera, be sure to hold the camera by
its hardie with one hand, and then release the lever of the
tripod base, otherwise the camera may drop off.
—i§6—