Table of Contents
Advertisement
RMS-SNMP01A SNMP Card
User Manual
●
4.2 Logging In to the WebUI
Procedure
Step 1 Open a browser (Chrome, Firefox, or Edge are supported). Take Edge as an
example. Choose Settings > Default browser and set Allow sites to be reloaded
in Internet Explorer mode (IE mode) to Allow.
Step 2 Choose More tools > Internet options, click the Advanced tab, check that Use
TLS 1.2 and Use TLS 1.3 are selected, and click OK.
Step 3 Enter https://
language, and enter the correct User Name and Password. The default user name
is admin, and the preset password is Changeme.
Figure 4-1 Logging in to the WebUI
Issue 10 (2024-01-30)
automatic synchronization to synchronize the local time server of the
SNMP card, and import the SSL certificate.
–
On the Performance Data tab page, you can set the period for recording
performance data.
–
On the SNMP tab page, you can change the SNMP version, add a
network management system (NMS), and configure SNMP TRAP.
–
On the RCCMD tab page, you can configure the ESN, enable or disable
RCCMD shutdown, enable or disable SSL encrypted transmission,
configure events, and manage RCCMD certificates.
Maintenance page
–
The Data Maintenance page allows you to export the users' operation
records, export the performance data, historical alarms, and serviceability
data of a single UPS or all UPSs over WebUI, and delete the performance
data and historical alarms of a single UPS or all UPSs.
–
The Upgrade page allows you to upgrade the SNMP card software and
UPS2000-A software.
SNMP card IP address in the address box of the browser, select a
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Managing the UPS on the WebUI
18
Advertisement
Table of Contents
