Standalone Ai/Di Module - Huawei RMS-SNMP01A User Manual

RMS-SNMP01A SNMP Card
User Manual
Figure 3-4 RJ11 terminal
As shown in
Table 3-2
Table 3-2 Mapping between wiring terminals and signals
(RJ11) Terminal to the
SNMP Card
X1.1
X1.2
X1.3
X1.4
X1.5
X1.6

3.5.2 Standalone AI/DI Module

AI/DI_1 is a 12 V level output port that cannot connect to an external power
source.
Supported Standalone AI/DI Modules
The SNMP card supports one standalone AI/DI module. The model is MUE06A. If
the SNMP card is configured with the AI/DI module, it can support one AI/DI
signal port. This port supports 12 V DC power output. For details about other
functions and usage, see the
Issue 10 (2024-01-30)
Figure 3-4, the pins from left to right in view A are X1.1 to X1.6.
lists the mapping between wiring terminals and signals.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
RJ11 Terminal Signal
GND
-
RS485–
RS485+
-
12 V
ECC500 V600R001C03 User Manual .
3 Installation and Basic Settings
ENR1DETA MODULE
RJ11 Terminal Signal
GND
-
RS485–
RS485+
-
12 V
11