Table of Contents
Advertisement
RMS-SNMP01A SNMP Card
User Manual
number (and country code). To change the preceding information, you need to
enter the correct original password. Click Submit.
Figure 4-15 Modify User
Idle Timeout Logout
You can set Allowed timeout (min). After the web page times out, you are
logged out, as shown in
4.5.3 Site Config
On the Site Config tab page, you can set the system date and time, select the
system time zone, and synchronize the Windows time, as shown in
After the settings are complete, click Submit. The SNMP card can synchronize the
local time from the NTP server using the RFC868, NTPv3, or RFC1305 protocol. To
enable this, specify a valid NTP server IP address and click Submit for the setting
to take effect, as shown in
from an NMS, such as the NetEco 1000U, as shown in
NMS IP address from the NMS IP address list and click Submit for the setting to
take effect.
The SNMP card also supports the settings of the system name (ups2000 by
default), system location (Not Configure System Location by default), and
system contact information (Not Configure System Contact by default) on the
WebUI.
The SNMP card supports Secure Sockets Layer (SSL) certificate import, as shown
in
login. You need to apply to a third-party institution for the certificate.
Issue 10 (2024-01-30)
Figure
4-19. The certificate is used for SSL encryption protection for WebUI
Copyright © Huawei Digital Power Technologies Co., Ltd.
Figure
4-13.
Figure
4-17. The SNMP card can also synchronize time
4 Managing the UPS on the WebUI
Figure
Figure
4-18. Select a valid
4-16.
31
Advertisement
Table of Contents
