Table of Contents
Advertisement
RMS-SNMP01A SNMP Card
User Manual
●
Issue 10 (2024-01-30)
Figure 4-36 RCCMD execute
RCCMD TRAP: When the event happens, the SNMP card will send the Trap
message to all connected RCCMD clients based on the sending mechanism.
If you want to define the Trap message by yourself, use TRAP signals to
display the UPS information. For example, if you enter #INVOLT V, the
RCCMD client will receive the UPS input voltage value (for example, single-
phase: 220 V; three-phase A: 220 V, B: 220 V, C: 220 V).
signal names that can be entered.
Figure 4-37 RCCMD TRAP
Table 4-8 RCCMD Trap signals
Signal Name
#MODEL
#OUTPOWER
#OUTVOLT
#OUTCURR
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Managing the UPS on the WebUI
Description
ESN of the UPS
Active power
Output voltage
Output current
Table 4-8
lists the
Unit in the UPS
-
kW
V
A
44
Advertisement
Table of Contents
