Table of Contents
Advertisement
RMS-SNMP01A SNMP Card
User Manual
Figure 4-22 Adding an SNMPv3 user
Figure 4-23 SNMPv1&SNMPv2c read and write community settings (initial
configuration)
Issue 10 (2024-01-30)
NO TE
● SNMPv3 is recommended. When SNMPv3 is changed to ALL or SNMPv1&SNMPv2c,
the system displays a message indicating that SNMPv1&SNMPv2c is an insecure
protocol. You also need to enter the correct read and write community names for the
NMS to connect to the SNMP card.
● The standard encryption algorithms MD5 and DES have security risks. You are advised
to use the secure encryption algorithms SHA and AES
NO TE
● Before you add an SNMPv3 user, set the SNMP version to SNMPv3 or ALL.
● When the NMS uses SNMPv1&SNMPv2c to manage the UPS, the read and write
communities must be the same as those of the SNMP card. The read and write
communities must be different.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Managing the UPS on the WebUI
35
Advertisement
Table of Contents
