Protecting The Server By Using The Rccmd Software; Introduction To The Software; Rccmd Event Shutdown And Message Sending - Huawei RMS-SNMP01A User Manual

Snmp card

Hide thumbs Also See for RMS-SNMP01A:

Table of Contents

RMS-SNMP01A SNMP Card

User Manual

The RCCMD shutdown software is part of the centralized monitoring system of the

Generex network. The UPS2000 SNMP card integrates the functions of the

Generex RCCMD server:

●

For the method of installing the RCCMD client, see the manual related to the

RCCMD.

Procedure

Step 1 On the RCCMD client, choose Connections, add the SNMP card IP address, and set

the encryption mode to encryption, as shown in

Issue 10 (2024-01-30)

Protecting the Server by Using the

Sends a shutdown command, notification message, execution command, or

trap message to the RCCMD client.

Receives the message "UPS alive check" sent by the RCCMD client and replies

with the system status.

Configures and saves the address and port for receiving the shutdown

command, and the message sending mechanism.

NO TE

● If encryption is disabled, you do not need to select the encrypted transmission.

● All configurations take effect only after restart.

9 Protecting the Server by Using the RCCMD

RCCMD Software

Figure

9-1.

Software

Table of Contents