Table of Contents
Advertisement
RMS-SNMP01A SNMP Card
User Manual
●
●
12.2 Changing an Authentication Password
Procedure
Step 1 Access the SNMP card board through an SSH port and log in with the enspire user
name and password.
Step 2 Run the passwd enspire command to change the password of the enspire user.
Step 3 Enter a new password and re-enter it as instructed and press Enter.
shows the operation screen.
Issue 10 (2024-01-30)
Change the password immediately upon first SSH login.
Use a password with certain complexity.
Avoid using default or weak passwords, which are prone to attacks and
cracking by unauthorized users. To ensure system security, maintenance
engineers should ensure that the password length and complexity meet the
following requirements while changing passwords. A password must meet the
following requirements:
–
Change the default password immediately after the system goes online.
–
Do not use a weak password such as password, admin, and 123456.
–
The password must contain at least eight characters.
–
The password must contain at least two types of the following characters:
digits, uppercase letters, lowercase letters, and special characters (`~! @#
$%^&*-_=+;:'",. ? or space).
–
The password must be different from the previous five passwords.
–
The password must be different from the username or its reverse.
–
Periodically change the password of the user account.
Leaving a password unchanged for a long time increases the risk of
password compromise. Change the password at least once half a year.
Copyright © Huawei Digital Power Technologies Co., Ltd.
12 Changing the SSH Access Password
Figure 12-1
65
Advertisement
Table of Contents
