Table of Contents
Advertisement
RMS-SNMP01A SNMP Card
User Manual
Step 4 Click Log In. The home page is displayed.
Table 4-1 User description
Default User
admin
(administrator)
operator
(common user)
----End
4.3 Monitoring Page
4.3.1 Monitoring Page and Active Alarms Tab Page
After login, the Monitoring page is displayed, showing the UPS model and ESN.
The Active alarms tab page in the UPS information area is displayed, as shown in
Figure
the device name. After the change, you can confirm the new name in the dialog
box that is displayed or click Enter.
Issue 10 (2024-01-30)
NO TE
The preset IP address for the SNMP card is 192.168.0.10. You can set the Ethernet IP
address for the SNMP card on the WebUI or app. The IP address ranges from 1.0.0.0 to
223.255.255.255.
Preset
Password
Changeme
Changeme
NO TE
● Change the initial password upon the first login.
● There is no verification code needed on the login page by default. After three login
failures, a verification code is required.
● If you enter incorrect passwords for five consecutive times, the account will be locked
out for 5 minutes.
4-2. Click the device name in the upper left corner of the page to change
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Managing the UPS on the WebUI
Permission
Performs all operations on the WebUI,
including system running information
browsing, system information exporting,
parameter setting, system control, system
configuration, and system maintenance.
Browses system running information, exports
system information (including historical alarms
and logs) except fault data, and clears faults.
Other control and maintenance functions that
may affect system operation are unavailable to
this user and parameters cannot be set.
19
Advertisement
Table of Contents
