RMS-SNMP01A SNMP Card
User Manual
●
●
●
Issue 10 (2024-01-30)
RCCMD Shutdown: Specify the RCCMD client IP address and port. When the
RCCMD client receives the job, it will perform the shutdown operation.
Figure 4-34 RCCMD shutdown
RCCMD Message: Specify the RCCMD client IP address, port, and message to
be conveyed. The RCCMD client will receive the message. For example, enter
This is a test message.
Figure 4-35 RCCMD message
RCCMD Execute: Specify the RCCMD client IP address, port, and command to
be executed. For example, enter SHUTDOWN, and the RCCMD client will shut
down the computer after receiving the command.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Managing the UPS on the WebUI
43