RMS-SNMP01B SNMP Card
User Manual
4
4.1 Introduction to Web Pages
The user interface (UI) snapshots in this document correspond to the software version
UPS2000 V200R001C01SPC300. The UI snapshots are subject to change without notice.
Contact Huawei technical support to obtain the latest snapshots if you need.
Issue 10 (2020-03-20)
Managing the UPS on the WebUI
Monitoring page
−
The Active Alarms page displays active alarms generated for the UPS.
−
The Real-Time Data page displays real-time running data of UPS modules.
The Param. Settings page allows you to set the UPS temperature and humidity
−
alarm parameters.
−
The Control page allows you to start or shut down the UPS.
Query page
−
The Logs page allows you to query users' operation information to know recent
operations.
The Performance Data page displays the performance data of UPS. You can query
−
and export the performance data of a selected UPS.
−
The Historical Alarms page displays alarms of UPS. You can query and export the
historical alarms of the selected UPS.
Config page
−
The Comm. Config page allows you to configure the IP address of SNMP card,
NAT mapping, Sender's Email Settings, and Alarm Notification.
−
The User Mgmt page allows you to create, change, and delete users.
−
The Site Config page allows you to set the system parameters, change the system
date and time, select a time zone, synchronize the local clock, and import the SSL
certificate.
−
The Performance Data page allows you to set the performance data save period.
−
The SNMP page allows you to change the SNMP card version, add an NMS, and
configure the SNMP TRAP.
Copyright © Huawei Technologies Co., Ltd.
4 Managing the UPS on the WebUI
9