Table of Contents
Advertisement
RMS-SNMP01A SNMP Card
User Manual
Figure 4-33 Buttons after one event is expanded
Table 4-7 Buttons after one event is expanded
No.
1
2
3
Adding one job for one event: Select one event (for example, Inverter on), click
the button for adding one job, and the page for adding a job for the event is
displayed.
When adding a job, the job types to be selected are: RCCMD Shutdown, RCCMD
Message, RCCMD Execute, and RCCMD TRAP. RCCMD Shutdown is selected by
default. For different job types, you need to enter different contents.
Issue 10 (2024-01-30)
Name
Button for modifying
Button for deleting
one job
Button for test
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Managing the UPS on the WebUI
Description
A dialog box for modifying a job is
displayed after you click this button.
You can modify the job.
You can delete a job by clicking this
button.
If you click this button, the job will be
executed and a message showing test
succeeds or fails will be displayed on
the page.
42
Advertisement
Table of Contents
