Table of Contents
Advertisement
RMS-SNMP01A SNMP Card
User Manual
12
12.1 Maintenance Suggestions
● SSH is used only for advanced maintenance.
● Change the preset password before using the SSH protocol.
● Except for password changes, do not perform any other operations. Otherwise,
● Damages to the SNMP card caused by operations except password change are
● Remember the new password.
● To prevent brute force cracking, an account is automatically logged out if no
● SSH v2 is adopted for secure transmission.
●
●
Issue 10 (2024-01-30)
Changing the SSH Access Password
WARNING
the SNMP card cannot work properly.
not covered by warranty.
operation is performed within 5 minutes after command line login.
NO TE
When Windows accesses the SNMP card over SSH, you need to use client software such as
PuTTY.
Security information involved in Secure Shell (SSH) login is the command line
user name and password.
System accounts are as follows:
–
Administrator root: Direct login is not supported. Log in as enspire and
run su to switch to the root account. The user name cannot be modified.
The preset password is Changeme, which can be modified.
–
Common user enspire: The user name cannot be modified. The preset
password is Changeme, which can be modified.
–
Common user prorunacc: The user account is used to run service
programs. Login with a password is not supported. Log in as root and run
su to switch to the prorunacc account.
Copyright © Huawei Digital Power Technologies Co., Ltd.
12 Changing the SSH Access Password
64
Advertisement
Table of Contents
