Historical Alarms - Huawei RMS-SNMP01A User Manual

Snmp card

Hide thumbs Also See for RMS-SNMP01A:

Table of Contents

RMS-SNMP01A SNMP Card

User Manual

Figure 4-7 Performance Data

Select a device name, set the start time and end time, and click Query. The

performance data of the selected UPS in the specified period is displayed. The

interval is determined by the value set on the Config > Performance Data page.

The default interval is 30s.

Figure 4-8 Performance data query

4.4.3 Historical Alarms

Select Historical Alarms from the menu at the first level. Then you can query

historical alarms in a specified time period, as shown in

Issue 10 (2024-01-30)

Figure 4-8

shows an example.

4 Managing the UPS on the WebUI

Figure

4-9.

Table of Contents