Installing M.2 Solid State Drives - Supermicro SuperServer SYS-211E-FRN13P User Manual

Installing M.2 Solid State Drives

The X13SEVR-SP13F
the 2280 form factor.
Installing M.2 Drives
1. Remove power from the system and then remove the top cover as described in Sections
3.1 and 3.2.
2. Remove any components obstructing the M.2 slot.
3. If necessary, use a tweezer to remove the plastic pin from its current location (J7). Next,
insert the plastic pin into the desired plastic pin holder location, J7 for the 2280 form
factor.
4. Insert the M.2 SSD sideways into the connector so that it lays flat, then secure it to the
motherboard with the plastic pin.
5. Finish by replacing the cover and restoring power to the system.
Chapter 3: Maintenance and Component Installation
supports PCIe 5.0 x2
49
NVMe M.2 SSD 2280. The M.2 slot supports