Installing M.2 Solid State Drives - Supermicro SuperServer SYS-220TP-HTTR User Manual

Installing M.2 Solid State Drives

Each node can accommodate two M.2 solid state drives (SSDs) using a storage controller
card (SCC-P2N2M2-P2). It supports PCIe Gen4 M.2-NVMe, size 2280/60/42 with regular
GenZ-2C pin as the interface connector.
SSD Socket
Hole for Standoffs
(choose one)
To Install M.2 SSDs
Caution: Use industry-standard anti-static equipment, such as gloves or wrist strap, and
follow precautions to avoid damage caused by ESD.
1. Pull the controller card up and out of the motherboard slot (SXB6). On the motherboard,
remove any DIMMs obstructing access to the carrier card slot.
Figure 3-8. M.2 Storage Controller Card Slot
Chapter 3: Maintenance and Component Installation
Figure 3-7. M.2 SSD Card
Controller Card
52
SSD Socket
Hole for Standoffs
(choose one)