Table of Contents
Advertisement
3.11 BMC Reset
The BMC can be reset using the button on the front control panel or on the chassis rear.
•
Reset – Press and hold the button. After six seconds, the LED blinks at 2 Hz. The BMC
resets and the reset duration is approximately 250 ms. Then the BMC starts to boot.
•
Restore factory default configuration – Hold the button for twelve seconds. The LED blinks
at 4 Hz while defaults are configured. Note: All BMC settings including username and
password will be removed except the FRU and network settings.
•
Firmware update – When the BMC firmware is being updated, the UID LED blinks at 10 Hz.
Event
Reset
Restore
Defaults
Update
Chapter 3: Maintenance and Component Installation
BMC Reset Options
UID LED
Blue, blinking at 2 Hz
Blue, blinking at 4 Hz
Blue, blinking at 10 Hz
58
BMC Heartbeat LED
Green, solid
Green, solid
Advertisement
Table of Contents
Troubleshooting
