Supermicro SuperServer SYS-211E-FRN13P User Manual page 23

Assembling the Inner and Outer Rails
1. Identify the left and right outer rails. Begin by assembling the left outer rail set.
2. Align the rear side of the long outer rail with the short outer rail. Ensure that the locking
screw on the shorter rail fits between the longer rail.
Long Outer Rail
Front
3. Slide the long outer rail to the front until it is fully extended and the locking screw is
secure.
4. Insert the inner rail in the longer outer rail, then secure it by pressing the locking tab on
the back side as shown in Figure 2-4.
5. Slide the inner rail inward until the rails are securely connected.
6. Repeat steps 1-5 for the right rail set.
Short Outer Rail
Figure 2-2. Assembling the Outer Rails
Secure the Locking Screw
Figure 2-3. Extending the Long Outer Rail
23
Chapter 2: Server Installation
Rear
S
UPERMICR
Right